[Momonga-devel.ja:00909] Re: kernelビルド他

[Akira Shibata <cipher@xxxxxxxxxxxxxxxx>]

ども、SIVAです。

ちょっとお聞きしたいのですが、昨日の夜からwith付でビルドしていたの
ですが、会社から帰ってきても反応無しでした。そこで^Cでとめて
OmoiKondarara.logをみてみたのですが、
with無しの場合
* PCI Hotplug Support
*
Support for PCI Hotplug (EXPERIMENTAL) (CONFIG_HOTPLUG_PCI) [M/n/y/?]
  Compaq PCI Hotplug driver (CONFIG_HOTPLUG_PCI_COMPAQ) [M/n/?]
    Save configuration into NVRAM on Compaq servers (CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM) [Y/n/?]
  IBM PCI Hotplug driver (CONFIG_HOTPLUG_PCI_IBM) [M/n/?]
  ACPI PCI Hotplug driver (CONFIG_HOTPLUG_PCI_ACPI) [M/n/?]
System V IPC (CONFIG_SYSVIPC) [Y/n/?]
BSD Process Accounting (CONFIG_BSD_PROCESS_ACCT) [Y/n/?]
Sysctl support (CONFIG_SYSCTL) [Y/n/?]
Kernel core (/proc/kcore) format (ELF, A.OUT) [ELF]
  defined CONFIG_KCORE_ELF
Kernel support for a.out binaries (CONFIG_BINFMT_AOUT) [M/n/y/?]
Kernel support for ELF binaries (CONFIG_BINFMT_ELF) [Y/m/n/?]
Kernel support for MISC binaries (CONFIG_BINFMT_MISC) [M/n/y/?]
Power Management support (CONFIG_PM) [Y/n/?]
  Advanced Power Management BIOS support (CONFIG_APM) [M/n/y/?]
    Ignore USER SUSPEND (CONFIG_APM_IGNORE_USER_SUSPEND) [N/y/?]
    Enable PM at boot time (CONFIG_APM_DO_ENABLE) [N/y/?]
    Make CPU Idle calls when idle (CONFIG_APM_CPU_IDLE) [N/y/?]
    Enable console blanking using APM (CONFIG_APM_DISPLAY_BLANK) [N/y/?]
    RTC stores time in GMT (CONFIG_APM_RTC_IS_GMT) [N/y/?]
    Allow interrupts during APM BIOS calls (CONFIG_APM_ALLOW_INTS) [N/y/?]
    Use real mode APM BIOS call to power off (CONFIG_APM_REAL_MODE_POWER_OFF) [N/y/?]

と、CONFIG_APM系で進んで問題なくビルドは成功したのですが、
with付の場合
* PCI Hotplug Support
*
Support for PCI Hotplug (EXPERIMENTAL) (CONFIG_HOTPLUG_PCI) [M/n/y/?]
  Compaq PCI Hotplug driver (CONFIG_HOTPLUG_PCI_COMPAQ) [M/n/?]
    Save configuration into NVRAM on Compaq servers (CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM) [Y/n/?]
  IBM PCI Hotplug driver (CONFIG_HOTPLUG_PCI_IBM) [M/n/?]
  ACPI PCI Hotplug driver (CONFIG_HOTPLUG_PCI_ACPI) [M/n/?]
System V IPC (CONFIG_SYSVIPC) [Y/n/?]
BSD Process Accounting (CONFIG_BSD_PROCESS_ACCT) [Y/n/?]
Sysctl support (CONFIG_SYSCTL) [Y/n/?]
Kernel core (/proc/kcore) format (ELF, A.OUT) [ELF]
  defined CONFIG_KCORE_ELF
Kernel support for a.out binaries (CONFIG_BINFMT_AOUT) [M/n/y/?]
Kernel support for ELF binaries (CONFIG_BINFMT_ELF) [Y/m/n/?]
Kernel support for MISC binaries (CONFIG_BINFMT_MISC) [M/n/y/?]
Power Management support (CONFIG_PM) [Y/n/?]
  ACPI support (CONFIG_ACPI) [Y/n/?]
    ACPI Debug Statements (CONFIG_ACPI_DEBUG) [N/y/?]
ここまでは進んでいるのですが、ここで止ってしまいました。
5度ほど繰り返してみたのですがやはり反応は同じでした。
現在Momongaの2台とも同じ反応です。

何か変なことやっているのでしょうか?
コマンドは
$../tools/OmoiKondara -r "-ba --define 'with_new_acpi_driver 0'" kernel
ですので、間違いはないと思うのですけど
-- 
Akira Shibata <cipher@xxxxxxxxxxxxxxxx>