[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Momonga-users.en:00027] Re: [Nvidia proprietary driver]

Thanks, everything works fine now. I've just to tune up a little
acceleration and speed of the touch pad. But now having a (working)
xorg.conf make me easy to fix up things.

Again, thanks for help and support for this great distro!

2009/8/10 Ichiro Nakai <ichiro@xxxxxxxxxxxxx>:
> On Mon, 10 Aug 2009 00:17:03 +0200
> Ylon <ylon@xxxxxxxx> wrote:
>> I've put xorg.conf file in /etc/X11 folder... but looks like my flying
>> squirrel did simply ignore it. Indeed I've made some modification,
>> like change to match my hardware, but nothing: it did just run (or
>> should I say "fly"?) with the detected hardware... as no xorg.conf
>> exist.
> Please type diff command like
> $ diff -u Xorg.0.log.FAIL Xorg.0.log.GOOD > Xorg.0.log.diff
> and watch the Xorg.0.log.diff carefully.
> I see following lines.
> -(++) Using config file: "xorg.conf.new"
> +(==) Using config file: "/etc/X11/xorg.conf"
> You have a xorg.conf.new in your home directory.
> X-server was using this file.
> Please remove xorg.conf* from your home directory.
> Probably, /etc/X11/xorg.conf will work.
>> So, I've try to "forcing" it to read the .conf file.
>> After close Xserver (init 3 on terminal) and run Xorg -config /etc/X11/xorg.conf
>> It was just even worse than jump off from a tree by night: it just
>> gave ma a black screen with no sign of life.
>> Same issue if I try to use an autogenerated xorg.conf (Xorg
>> -configure)... my momonga squirrel just don't want to use xorg.conf:
>> no matter what.
>> I've attached my autogenerated xorg.conf (which tell exactly about my
>> hardware on notebook). Plus the log file when when system run fine
>> (Xorg.0.log.GOOD) with auto detected server.. and the bad one
>> (Xorg.0.log.FAIL) when forced to read any xorg.conf (black screen).
> You have two pointing devices.
> (II) config/hal: Adding input device TPPS/2 IBM TrackPoint
> (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
> (II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
> (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
> And
> disable LVDS
> (II) RADEON(0): RADEONRestoreMemMapRegisters() :
> == cut ==
> found in Xorg.0.log.FAIL.
> I attached my xorg.conf.
> It is just a sample.
> Please modify it to correct for your hardware.
> I attach Xorg.0.log of my Apire One to this mail.
> It's working fine with synaptics.
> Double touch (to drag icons) and scrolling (slide finger on right
> side of the touch pad) are working.
> --
> Ichiro Nakai
> ichiro@xxxxxxxxxxxxx